Device Address Label And Rating Plate; Product Codes - GE MAC 2000 Service Manual

Introduction
Serial Number Format (cont'd.)
Item
5
6

Device Address Label and Rating Plate

The Device Address label and Rating Plate is laid out in the following format.
Depending on the product, the label may vary slightly in format.
Item
1
2
3
4
5

Product Codes

The product code identifies specific system platforms.
You can identify the product code using the serial number listed on the product label
located in one of the following places:
• On the product label attached to the device.
• On the product label provided with the application CD.
For software application systems, you can view the serial number by launching the
system application and clicking Help > About.
For information on launching the application, refer to the service or operator's manual
for this system.
30
Name
Manufacturing Site
Miscellaneous
Characteristic
Description
Product description
Country of origin
Symbols
See "Symbol Descriptions" on page 21
this label.
Electrical rating of the device
Manufacturer name and address
MAC™ 2000 ECG Analysis System
Description
One-letter code identifying the site where the device was
manufactured. For example, F = Milwaukee, N = Freiburg,
P = Bangalore
For example, P = device is a prototype, R = device was
refurbished, U = device was upgraded to meet the
specifications of another product code, A= device is in
production.
for a description of the symbols used on
2053535-003C