Disassembly And Cleaning; Accessories - H.C Duke & Son Electro Freeze COMPACT Series Operator's Manual

ELECTRO FREEZE Model CS600
7

Disassembly and Cleaning

It is important that the freezer be disas-
sembled, washed, lubricated and sanitized
before operation.
7.1 Cleaning Accessories
The following are accessories necessary for cleaning, sanitizing and disassembly/
assembly.
eter used to clean the cylinder.
handle used with brush p/n HC15010.
diameter with 36-inch handle used to clean
drain tube.
HC158003. 1-1/8-inch diameter and 7/16-
inch diameter used for cleaning mix feed
tube and general cleaning.
HC158012
Figure 7-1
184596
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are
in the "OFF" position and
that the main power supply
is disconnected.
1. BRUSH - HC158009. 4-inch diam-
2. HANDLE - HC158012. 36-inch
3. BRUSH - HC158077. 9/16-inch in
4. BRUSH - DOUBLE END -
HANDLE-BRUSH 36" FIBERGLASS
HC158077 BRUSH-9/16" DIA X 36" HANDLE
HC169374 TOOL-O RING REMOVAL
HC158003 BRUSH-7/16" DIA & 1-1/8" DIA DOUBLE END
HC158026 BRUSH-1" DIA X 12" LONG

Accessories

The cleaning and sanitizing instructions
explained in this manual are required to
maintain a clean, sanitary freezer. The
freezer should be disassembled, cleaned,
reassembled, lubricated and sanitized to
ensure the best possible product quality
and freezer operation.
Persons assembling, cleaning, or sanitizing
the freezer must wash and sanitize hands
and forearms with an approved sanitizer.
5. TOOL - O-RING REMOVAL.
HC169374. Aids in removing O-rings from
plunger, head, air relief plug, and spindle.
6. LUBRICANT - LUBRI-FILM PLUS
HC158054A. Approved lubricant for moving
parts and O-rings.
7. BRUSH - HC158026. 1-inch in
diameter 12 inches long used to clean the
hopper walls.
8. WASH BOTTLE - HC196103. used
to flush the plunger and hopper walls.
HC158009 BRUSH-4" DIA
HC158054A LUBRICANT-LUBRI-FILM PLUS
HC196103 BOTTLE WASH
9