Port Configuration - ProSoft MVI56E-MCMR User Manual

Configuring the MVI56E-MCMR Module
User Manual
The sample configuration values configure the module database to store
W D [0 to 599] in registers 0 to 599, and R
RITE ATA
1000 to 1599, as shown in the following illustration.
Important: If you need to configure different values for the Read Register Count and Write
Register Count parameters, you must also configure the same values in the user-defined data type
MCMRData in the sample program (page 37).

2.3.3 Port Configuration

The M
ODBUS
configured as a Modbus Master device. Port 1 and Port 2 each have their own
set of configuration parameters.
Note: Any changes made within the configuration file must be downloaded to the MVI56E-MCMR
module from ProSoft Configuration Builder.
In ProSoft Configuration Builder, expand the MVI56E-MCMR node, and then
expand the MCM P
E - M
DIT ODBUS
select M
ASTER
Page 54 of 223
P configuration parameters are used when the module is
ORT X
1 node. Double-click the M
ORT
P 1 dialog box, click to highlight the Type parameter, and then
ORT
from the dropdown list.
MVI56E-MCMR ♦ ControlLogix Platform
Modbus Communication Module with Reduced Data Block
D [0
EAD ATA TO
P
ODBUS ORT
599] in registers
1 icon. In the
ProSoft Technology, Inc.