ProSoft MVI56E-MCMR User Manual page 126

Diagnostics and Troubleshooting
User Manual
If PCB is unable to connect to the module:
1 Click the B
Select the module, then right-click and choose S
2 Close ProSoft Discovery Service, and click the C
3 If these troubleshooting steps fail, verify that the Ethernet cable is connected
properly between your computer and the module, either through a hub or
switch (using the grey cable) or directly between your computer and the
module (using the red cable).
If you are still not able to establish a connection, contact ProSoft Technology for
assistance.
Page 126 of 223
D ( ) button to open the ProSoft Discovery Service.
ROWSE EVICE S
MVI56E-MCMR ♦ ControlLogix Platform
Modbus Communication Module with Reduced Data Block
ELECT FOR
button again.
ONNECT
PCB.
ProSoft Technology, Inc.