Table of Contents
Advertisement
12 Appendix
12
Notes and Restrictions on the Use of the iFax Feature
172
iFax
iFax Transmission
iFax reception/printing
iFax reception/iFax reception to mailbox
Forwarding an incoming iFax to a regular
fax machine
Forwarding an incoming fax to an iFax
Mailbox
Automatic forwarding of a stored document,
automatic fax/iFax transmission
Printing of a stored document (Fax Private
Polling/Fax to Mailbox) instructed from the
control panel
Printing of a stored document (scanned
document/print document) instructed from
the control panel
Automatic printing of a stored document
O
The job can be executed during the interrupt mode.
X
The job cannot be executed during the interrupt mode.
The job request is accepted, but cannot be executed during the interrupt mode.
*1 The job instruction from the control panel is required/not required to execute the job.
*2 During interruption, any document displayed as a pending job on the [Job Status] screen can be printed by selecting
[Promote Job]. When priority printing is instructed during interruption, the next priority printing is disabled until the
instructed print job is completed.
Note
• The followings jobs are executed regardless of the interrupt mode.
- Automatic fax transmission (to mailbox/relay broadcast)
- Fax reception
Notes on E-mail Transmissions
"Doc. Sent" that appears on the communications confirmation screen, activity report,
or transmission report indicates that an e-mail has been delivered to the SMTP server,
which was configured on the machine for transmitting e-mail. The e-mail, however, may
not reach its destination for some problem over the Internet. In such case, the machine
will not be notified of such transmission error. After sending an important e-mail, we
suggest you to confirm it is received, such as by calling the recipient.
Feature Combinations when Transmitting an iFax
[Resolution] on the [General Settings] screen
When [TIFF-S] is selected for [iFax Profile] on the [Transmission Options] screen,
[Superfine (400 dpi)] or [Superfine (600 dpi)] cannot be selected.
For information on iFax profiles, refer to "iFax Profile (Specifying iFax Profiles)" (P.69).
[Communication Mode] on the [Transmission Options] screen
The communication mode can be specified only when sending e-mail using the fax
gateway feature. For other cases, e-mail is sent via G3 Auto.
For more information on the fax gateway feature, refer to "Sending an iFax to normal fax machines
via a relay station" (P.38).
Job
Job Instruction
Job
from the
Execution
1
*
Control Panel
Required
O
*2
Required
O
Not required
Not required
Not required
X
Not required
X
Required
O
Required
X
*2
Required
O
Advertisement
Table of Contents
