Table of Contents
Advertisement
2 Fax
When Not Using a Receiver
1
Adjust the volume of the line monitor.
We recommend setting the volume of the line monitor to [Loud] so that it is easy to
hear the voice prompts.
For information on how to change the volume of the line monitor, refer to "Line Monitor Volume"
(P.106)
2
Select [On-hook (Manual Send/
Receive)] on the [Advanced
Features] screen.
3
Select [Manual Receive] from the
drop-down menu.
2
4
Specify the fax number of the facsimile information service.
Note
5
When the machine connects to the service, you will hear a series of voice prompts.
Follow the instructions given by the voice prompts to enter the required numbers.
6
When you finish entering the numbers, press the <Start> button.
88
The call destination can be specified using the numeric keypad address numbers, or
one touch buttons. The address book cannot be used.
The call destination can also be specified using the keyboard displayed on the
screen.
• When the line type is set to a pulse line, [Tone (:)] does not appear.
• If you want to send tones (or to use the touch-tone services) while using a pulse line, select
[Tone (:)].
• Some touch-tone services may not be available even if you set your telephone to send
tones.
Advertisement
Table of Contents
