Opening The Console; To Open The Console From Empower Software; To Open The Console From Masslynx Software - Waters ACQUITY UPLC H-Class Series System Manual

Requirement:
system. For instructions, see the online Help.
5. Open the control panels and console.
See also:
6. Prime the system.
See also:

3.2 Opening the console

You can perform the following tasks in the console:
• Monitor system performance
• Specify settings for certain module parameters
• Run diagnostic tests
• View an interactive diagram of the module components
See also:
The console online Help for additional information on how to perform these tasks.

3.2.1 To open the console from Empower software

1. From the Empower navigation bar, select Run Samples.
Result:
2. In the sample manager control panel, click Display console
Alternative:
from the menu that appears.

3.2.2 To open the console from MassLynx software

1. From the MassLynx window, click Inlet Method.
2. Click the Additional Status tab.
Result:
3. In the sample manager control panel, click Display console
Alternative:
from the menu that appears.
If this is the first time you are using this system, you must define a new
Monitoring control panels
Priming the system
A control panel for each device in the system appears.
Right-click the control panel for any module, and select Launch Console
A control panel for each device in the system appears.
Right-click the control panel for any module, and select Launch Console
April 4, 2018, 715005702 Rev. A
and Opening the console
Page 48
.
.