General Information; Trademarks - Waters ACQUITY UPLC H-Class Series System Manual

General information

Copyright notice
© 2018 WATERS CORPORATION. PRINTED IN THE UNITED STATES OF AMERICA AND IN
IRELAND. ALL RIGHTS RESERVED. THIS DOCUMENT OR PARTS THEREOF MAY NOT BE
REPRODUCED IN ANY FORM WITHOUT THE WRITTEN PERMISSION OF THE PUBLISHER.
The information in this document is subject to change without notice and should not be construed
as a commitment by Waters Corporation. Waters Corporation assumes no responsibility for any
errors that may appear in this document. This document is believed to be complete and accurate
at the time of publication. In no event shall Waters Corporation be liable for incidental or
consequential damages in connection with, or arising from, its use. For the most recent revision
of this document, consult the Waters website (waters.com).

Trademarks

®
ACQUITY is a registered trademark of Waters Corporation.
ACQUITY UPLC
Auto•Blend Plus
TM
eCord is a trademark of Waters Corporation.
®
Empower is a registered trademark of Waters Corporation.
®
KEL-F is a registered trademark of 3M.
®
Keps is a registered trademark of Illinois Tool Works Inc.
TM
LAC/E is a trademark of Waters Corporation.
®
MassLynx is a registered trademark of Waters Corporation.
®
Millennium is a registered trademark of Waters Corporation.
TM
MP35N is a trademark of SPS Technologies Inc.
TM
PEEK is a trademark of Victrex PLC.
®
PHILLIPS is a registered trademark of Phillips Screw Company.
®
PIC is a registered trademark of Waters Corporation.
®
Waters is a registered trademark of Waters Corporation.
®
is a registered trademark of Waters Corporation.
TM
is a trademark of Waters Corporation.
April 4, 2018, 715005702 Rev. A
Page ii