Download  Print this page

Diagnostics And Maintenance; Diagnostics Options; Loading New Firmware - Siemens SIMATIC CC712 Operating Instructions Manual

Industrial ethernet - cloudconnect
Hide thumbs

Advertisement

Diagnostics and maintenance

5.1

Diagnostics options

The following diagnostics options are available:
LEDs of the module
For information on the LED displays, refer to the section LEDs (Page 21).
Web Based Management (WBM)
To do this, you need to connect your PC to the gateway.
On the following WBM pages you obtain information on the status of the gateway:
● You will find general information on the status of the gateway on the start page of the
WBM, compare to section Info (Page 45).
● You will find the diagnostics messages on the diagnostics page of the WBM, refer to the
section Diagnostics (Page 93).
When important events occur, the gateway writes diagnostic messages to the diagnostics
buffer.
5.2

Loading new firmware

You can find the current firmware version of the device on the WBM page Info (Page 45).
New firmware versions
If a new firmware version is available for the module, you will find this on the Internet pages
of Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/25621/dl)
Save the firmware file on the configuration PC.
Downloading new firmware files
You load a new firmware file from the configuration PC on the gateway via the WBM.
You will find the description in the section Firmware (Page 91).
SIMATIC CC712
Operating Instructions, 05/2019, C79000-G8976-C503-01
5
95

Advertisement

Table of Contents
loading

  Related Manuals for Siemens SIMATIC CC712