Connections; Ethernet Interfaces (P1, P2) - Siemens SIMATIC CC712 Operating Instructions Manual

LEDs, Connectors, Buttons, CLP

2.2 Connections

LED name LED pattern
(colors)
Diagnosis Diagnostics
(green / yellow)
Security
(green)
P1 / P2 Connection to Ethernet at interface P1 or P2
(green / yellow)
2.2 Connections
2.2.1

Ethernet interfaces (P1, P2)

Ethernet interfaces
The gateway has two Ethernet interfaces according to Gigabit standard IEEE 802.3ab,
designed as RJ45 socket. They support autocrossing, autonegotiation and autosensing.
● P1
Cloud interface for connection of a cloud broker and OPC clients
● P2
Process interface for connecting the stations of the automation plant
Note
Connection to subnets
The two Ethernet interfaces are not designed as a switch, but are intended for connection to
different networks.
If the connection to the cloud is in the same subnet as the process connection, enable the
"Cloud interface in the same subnet" option in the "Interface configuration" in the
configuration.
The pin assignment of the Ethernet interfaces and other data can be found in the section
Technical specifications (Page 99).
22
Meaning / Module status
No error
Error, diagnostic message available. (See WBM "Maintenance > Diagnostics mes-
sages")
Reset is initiated (button pressed during startup).
Reset is executed (button can be released).
No secure connection to cloud server / OPC UA clients configured
All connections to cloud server / OPC UA clients configured as secure
At least one unsecure connection to cloud server / OPC UA clients configured
No Ethernet connection
Existing Ethernet connection
Existing connection with data traffic
Operating Instructions, 05/2019, C79000-G8976-C503-01
SIMATIC CC712