Siemens SIMATIC CC712 Operating Instructions Manual page 74

Configuration
4.9 Cloud configuration
● Start of data with separator or special character
<DATAPOINTS_BEGIN SEPARATOR=,\n>
Start of a text block that is repeated for sending data with separator string. The text block
can contain variables.
During the transfer of values or properties of data points, a separator string is added
between each text block to ensure reliable evaluation of the data. In this version, the
character string "comma + line break" is added after each text block but not after the last
block.
"
You declare the "
Line breaks as well as the characters "
after "
To still be able to add "
together with one of the following placeholders:
"
"
"
"
● 200
200
Function code (MindConnect IoT Extension)
● Data point
<DATAPOINT_NAME>
Name of the data point
● Data point ID
Number":"<DATAPOINT_ID>
Automatically assigned ID of the data point
● Group Name
<GROUP>
Group Name
● Value
<DATAPOINT_VALUE>
Value of the data point
● Attribute
<ADDITIONAL_ATTRIBUTE>
Attribute (MindConnect IoT Extension)
74
" is the separator.
SEPARATOR=
" separator string after the equal sign "
,\n
" " is the separator.
,
" " causes a line break.
\n
".
SEPARATOR=
<
" for a line break
\n
" for "<"
\l
" for ">"
\g
" for "\"
\\
" and "
< >
" and " " to the user data, you can use the masking character "
>
Operating Instructions, 05/2019, C79000-G8976-C503-01
":
=
" are not permitted in the separator string
"
\
SIMATIC CC712