● Export configuration
Saves the configuration currently used by the gateway to a configuration file on the PC.
● Load on device
Downloads the configuration file shown under "File" to the gateway.
Once the download is complete, the configuration data of the downloaded configuration
file is used by the gateway. The cloud application of the gateway is restarted.
Communication / Restart
Process communication / Restart
On this page, you can stop or start the communication between gateway and process
stations and initiate a restart of the application.
With each command, a message is output by the system and the displayed status is
The current status is displayed under "Status".
Click the button to stop communication.
The labeling of the button changes.
Click the button to restart communication.
Click the button to initiate a restart of the application.
This page contains diagnostics messages for internal events and errors.
Here you set whether and in which cycle the WBM updates the displayed diagnostic
Operating Instructions, 05/2019, C79000-G8976-C503-01