User - Siemens SIMATIC CC712 Operating Instructions Manual

● Key
Enter the NTP key in the selected format.
Permitted key length:
– ASCII: 5..20
– Hexadecimal: 10-40
● Key format
Specify the format in which you enter the key:
– ASCII
– Hexadecimal
Manual setting of date and time
The input boxes for date and time are only active with disabled time-of-day synchronization
via NTP.
● Time
Enter the current time of day manually in the specified format:
– hh:mm:ss
● Date
Enter the current date manually in the specified format:
– DD/MM/YYYY
● Save
When you click this button, the application saves the entered settings.
● Apply
The device only applies the saved time data when you click "Apply".
4.11.2

User

For the preset standard user data for initial login, see section Logging into the WBM
(Page 43).
Note
Changing the password
For security reasons, the user name and password preset at the factory must be changed at
the first login.
SIMATIC CC712
Operating Instructions, 05/2019, C79000-G8976-C503-01
Hour (0...23), minute and second can also be entered as single digits.
Month and day can also be entered as single digits.
Example: March is accepted as "03" or as "3".
Configuration
4.11 Maintenance
89