The entries contain a time stamp and the message text.
● Notes are displayed in blue.
● Warnings are displayed in red.
Examples of events:
- Establishment/termination of a communications connection
- Change to the configuration
Use of logging
Using the logging functions, you can export important events to a file.
Click the button to export the respective file to the PC file system.
The exported files are displayed in the footer of the WBM. You can open the files from the
PC file system or directly from the WBM tab.
Export log files
During runtime, information about important events is automatically saved. This data
contains information on the configuration, active procedures and error situations.
You should only use logging of events if you have problems with the application that you
cannot solve yourself.
Using the "Export" button, you can save this data in a logging file (*.enc).
The information in this unreadable file is encrypted and can only be read by Siemens
Industry Online Support. Send the log file back to your contact at Siemens Industry
● Security messages
You can save the security events here. Possible file formats: *.log, *.csv
● Diagnostic messages
Here you can save the diagnostic messages of the device in a compressed archive
Unzip the *.tqz archive and the following extracted *.tar archive. You can find the
diagnostic messages in a *.log file.
Operating Instructions, 05/2019, C79000-G8976-C503-01