Download  Print this page

Reset - Siemens SIMATIC CC712 Operating Instructions Manual

Industrial ethernet - cloudconnect
Hide thumbs

Advertisement

Diagnostics and maintenance

5.3 Reset

5.3
Reset
Functions and execution
The following functions are available for resetting:
● Restart
The configuration data is retained.
The gateway performs a restart.
● Reset to factory settings
The configuration data is deleted.
The gateway performs a restart.
You can execute the functions with the "SET" button.
To operate the button, refer to the section The button "SET" (Page 23).
Restart
The gateway ends productive operation, restarts automatically and takes up productive
operation again with the existing configuration data.
Resetting to factory settings: Effect
Note
Data is deleted
With the resetting to factory settings, all configuration data and process data on the gateway
is deleted.
With a reset to factory settings, the gateway can only be reached over the factory default
address data.
● Deleted data
The following data is deleted by resetting to factory settings:
– Addresses of the LAN interfaces configured by the user
– All other configuration data of the gateway
– All process data in the memory of the gateway
– User names and passwords
– All imported certificates
– Diagnostics buffer
96
They are reset to the factory default address data.
Operating Instructions, 05/2019, C79000-G8976-C503-01
SIMATIC CC712

Advertisement

Table of Contents
loading

  Related Manuals for Siemens SIMATIC CC712