Siemens SIMATIC CC712 Operating Instructions Manual page 77

● Group
⇒ Validity: MindConnect IoT Extension / Other Cloud
When entering the name, a drop-down list with groups is shown that starts with the letters
you have entered. Click on an entry to assign the data point.
● Attribute
⇒ Validity: MindConnect IoT Extension / Other Cloud
The attribute is applied to the user data as <ADDITIONAL_ATTRIBUTE>; see section
User data format (Page 71).
Enter the attribute according to the requirements of the cloud provider:
– Other Cloud: Optional
– IoT Extension: Mandatory
With a connection to IoT Extension, the attribute is interpreted as a label of the physical
units of the respective data point. The standard units are:
– C = Temperature in degrees Celsius
– P = Pressure in bars
– mm = Length in millimeters
– km/h = Speed in km/h
– m/s2 = Acceleration in m/s
– % = Size in percent
– %RH = Relative humidity in percent
– A = Current in amperes
– V = Voltage in volts
– W = Power in watts
– kWh = Energy in kilowatt hours
– VAh = Apparent energy in volt ampere hours
– dBm = Transmit power in decibel-milliwatts (logarithmic ratio)
– lux = Illuminance in lux (lm/m
Other compound units of the SI system can also be specified, for example:
m/h, m/s, m, km, mW, kW, mWh, mA, VArh
SIMATIC CC712
Operating Instructions, 05/2019, C79000-G8976-C503-01
If no attribute is demanded or required, leave the box empty.
2
)
2
Configuration
4.9 Cloud configuration
77