How To Delete A Site Setup; How To Save/Rename A Site Setup - Siemens SITRANS F FUH1010 Series Operating Instructions Manual

Section 2
To scroll the option list to [On] press
top of the display screen.
Type your password on the PC keyboard, use numeric keys, or press
Magnetic Wand to select the first character.
To move the cursor to the second character position press
Repeat the selection process for the second character. Continue this process until all
the required characters (8 max.) appear in the field.
To store code press
Re-type the code exactly as described above.
Press . This moves the cursor to the [Site Security] option list.
ENT
To scroll option list to [Site Security: On] press
Security, you must enter the correct code to turn it off.
To activate Site Security press

2.1.5 HOW TO DELETE A SITE SETUP

If you attempt to save a Site Setup when the memory is full, the screen will show [Memory
Full]. If you receive this message after issuing a Save/Rename Site command, then you will
have to delete an unneeded Site Setup to clear memory space. Note that Datalogger storage
and Site Storage share a common memory pool. Therefore, a large amount of logged data could
also trigger the [Memory Full] message. See [Meter Facilities/Datalogger Control] for instruc-
tions on how to clear Datalogger memory. Using the Defragment Command may also allow
additional sites to be stored (see Meter Facility/Memory Control Menu).
To delete a stored Site Setup:
To highlight [Delete Site Setup] press
To access the [Delete Site Setup] option list press
Move the cursor to the site name of the site setup you want to delete.
To delete the obsolete site setup press

2.1.6 HOW TO SAVE/RENAME A SITE SETUP

The Save/Rename Site command copies data from Active Memory to the Site Storage Mem-
ory. Saved Site Setups can be recalled for future use. This menu cell allows you to save a
Site Setup at any time during the programming process. However, you must recall and com-
plete the Site Setup in order to achieve operation. When you access the [Save/Rename Site]
menu cell, the name of the most recently created Site Setup (see [Create/Name Site]) appears
automatically. If this name is acceptable, you can press
Siemens Hardware
. [Confirm Code ?] appears at the top of the display screen.
ENT
ENT
ENT
2-5
then [Enter Code?] appears at the
ENT
. Once you turn on Site
to save the Site Setup.
ENT
1010BXFM-3
with the