Datalogger Data Option List; Alarm Letter Codes And Descriptions - Siemens SITRANS F FUH1010 Series Operating Instructions Manual

Section 2
THE DATALOGGER SETUP MENU STRUCTURE (continued)
Datalogger Setup
None Default – Datalogging is disabled.
Site ID You entered this site name when you created the site.
Date The report date according to the meter's real time clock. (Format: MM.DD.YYYY)
Time The report time according to the meter's real time clock. (Format: HH.MM)*
Path Vs The sonic velocity of the liquid in either Path 1 or Path 2.
V s The average liquid sonic velocity since the last report.
Path Valc The signal amplitude of the liquid in either Path 1 or Path 2.
Valc The signal strength measured at the time of the report.
Aeration The aeration percentage recorded at the time of the report.
Path Alarms The letter codes of any Path related alarms at the time of the report.
Alarms The letter codes of any alarms active at the time of the report (see below).
S.G Specific Gravity at current operating temperature.
Base S.G. Specific Gravity referenced to user selected temperature.
API# API number at current operating temperature.
Base API# API number referenced to user selectable temperature.
Kg/m3 Kilograms per cubic meter at current operating temperature.
Base Kg/m3 Kilograms per cubic meter referenced to user selectable temperature.
Temperature The current instantaneous liquid temperature.
Delta T (uSecs) The Up to Down transit-time difference measured at the time of the report.
Analog Inputs Allows the device to accept analog data from external devices (i.e., pressure, temperature)
Sonilocate Detects a sudden drop in pipe pressure. The Vs decrease is detected and time-stamped.
*The Time field expands to HH.MM.SS when you select a logging interval of more than once per minute.
If you select Alarms, the Datalogger logs the state of each alarm function upon generating
a report. A dash [-] represents an inactive alarm. A letter code represents an active alarm:

Alarm Letter Codes and Descriptions

S ....... Spacing ............... Transducer spacing may need re-adjustment.
E ...... Empty ................ Pipe is empty.
F ...... Fault .................. Three continuous seconds without new data update.
A ...... Aeration ............ Current aeration percentage exceeds the alarm setpoint.
M ..... Memory ............. Last valid reading for a selected interval during Fault condition.
K ...... Makeup ............. In-Process Makeup occurred.
I ....... Interface ............ Liquid Vs exceeds interface alarm setpoint.
LogTime Interval
Datalog Events

DATALOGGER DATA OPTION LIST

2-44
1010BXFM-3
4 Hr.
6 Hr.
12 Hr.
24 Hr.
Demand
None
Relay 2
Relay 1
Spacing
Empty
Aeration
ROC
Fault Alarm
Memory
Makeup