Download Print this page
Siemens Cerebrus Pyrotronics SA-11P Installation/Wiring Instructions
Siemens Cerebrus Pyrotronics SA-11P Installation/Wiring Instructions

Siemens Cerebrus Pyrotronics SA-11P Installation/Wiring Instructions

Air duct detectors

Advertisement

Quick Links

INSTALLATION/WIRING INSTRUCTIONS
CERBERUS PYROTRONICS™
MODELS SA-3I AND SA-11P
AIR DUCT DETECTORS
CERBERUS PYROTRONICS
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
P/N 315-096274-2
O
O
O
Cerberus Division
O
Siemens Building Technologies, Ltd.
50 East Pearce Street
Richmond Hill, Ontario L4B 1B7 CN

Advertisement

loading

Summary of Contents for Siemens Cerebrus Pyrotronics SA-11P

  • Page 1 Cerberus Division INSTALLATION/WIRING INSTRUCTIONS CERBERUS PYROTRONICS™ MODELS SA-3I AND SA-11P AIR DUCT DETECTORS CERBERUS PYROTRONICS Siemens Building Technologies, Inc. Siemens Building Technologies, Ltd. 8 Fernwood Road 50 East Pearce Street Florham Park, New Jersey 07932 Richmond Hill, Ontario L4B 1B7 CN...
  • Page 2 Figure 1 Typical Mounting of Duct...
  • Page 3 Figure 2 Recommended Locations in Duct Systems Figure 3 Exploded View...
  • Page 4 Figure 4 Sampling Tube Orientation...
  • Page 5 CERBERUS PYROTRONICS NOTE: All relay contacts are shown with system in the normal supervisory, no alarm, condition. WARNING: If the alarm relay contacts on the control board are being used to control 120 VAC operated equip- ment, then ensure that earth ground is properly connected to the internal ground strap, using the proper conduit lock nuts.
  • Page 7 NOTES: 1. All relay contacts are shown with the SA-3I/-11P powered by CAUTION: Do not use looped wire at the relay contact 120 VAC and in the normal supervisory, no alarm, condition. connections (NC, C, NO). Break wire runs at the 2.
  • Page 8 Installation and Test Requirements of NFPA TM-I3 Instructions, P/N 315-096274-2...

This manual is also suitable for:

Cerebrus pyrotronics sa-3i