Mechanical Setup - Siemens OH110 Technical Manual

3 Structure and function

Mechanical setup

3.4 Mechanical setup
22
Building Technologies
Fire Safety
One of the following devices is required to install a point detector:
Detector base (collective) DB110
l
Detector base (collective) DB110D
l
Detector base (collective) DB110R
l
Detector base (collective) DB110RD
l
Once the detector base (2) has been installed, the point detector (1) is easily
turned by hand or with the detector exchanger DX791 in the base. You must be
able to hear and feel the point detector snap into place and the marks (3) on the
point detector and the detector base must line up.
1 Point detector
2 Detector base
Properties
Quick installation and secure contact
l
The centered alarm indicator makes an alignment of the detector base
l
superfluous
Space for up to 4 auxiliary terminals
l
Accessories are available for a variety of different applications and can be
combined to suit the particular application in question.
See also
2 Accessories [➙ 23]
3 Marks
A6V10316298_e_en_--
2014-05-21