Siemens SITRANS F FUH1010 Series Operating Instructions Manual page 220

Index
O
Operation Adjust Menu 2-31
Operation Adjust Menu Structure 2-31
Operation Adjust 5-10
Outputting Datalogger 4-7
P
Parity 4-13
Password Entry Option 2-4
Pick/Install XDCR Menu 2-21
Pick/Install XDCR Menu Structure 2-23
Pipe Class 2-8
Selecting 2-8
Pipe Considerations For Clamp-on Transducers 5-1
Pipe Data Menu 2-6
Outer Diameter, Wall Thickness, 2-6
Pipe Data Menu Structure 2-7
Pipe Dimensions 5-1
Pipe Material 2-9
Selecting 2-9
Pipe Outer Diameter 4-3
Selecting 2-9, 4-4
Pipe Outer Dimension 2-9
Pipe Parameters 2-6
Pipe Size 2-8
Selecting 2-9
Pipe Table 4-2
Factory Settings 4-2
Accessing Menu 4-2
Pipe Temperature Range 2-19
Selecting 2-19
Pipe Wall Thickness 2-9, 4-3
Power Failure 2-1
Preparing The Pipe Surface 3-6
Print Site Setup 5-12
R
Recall Site Command 2-3
Recall Site Setup 2-2
Reference Hole 3-16, 3-20
Reflect Mode, Mounting Frames and Spacer Bar 3-13
Reflect Mode With Spacer Bar Only 3-14
Reflect Mount 3-14
Installation With Mounting Track 3-20
Relay Option List 2-49
Relay Setup 2-48, 5-11
Assigning Relay Functions 2-49
Reset, System 1-23
RS-232 Setup Menu 4-12
Baud Rate 4-13
Parity 4-13
RTD 3-25, 4-10
Calibrate Menu 4-10
Calibration By Data Entry 4-10
Index-6
1010BXFM-3