Specifications - Chroma 63800 Series Operation & Programming Manual

Programmable AC/DC Electronic Load 63800 Series Operation & Programming Manual
1.4

Specifications

* The specifications of Load are listed from the next page on.
1. The equipment is for indoor use only.
2. The altitude up to 2000 meters is allowed to use the equipment.
3. All specifications are tested under 20°C ∼ 30°C except otherwise stated.
4. The range for operation temperature is 0°C ∼ 40°C.
5. The relative humidity is from 10% to 90%.
6. The specifications of current accuracy are tested after the input is applied
for 30 seconds.
7. The typical temperature coefficient is 100ppm.
CAUTION
This equipment is not intended for performing measurements on CAT III
or IV.
1-2