Load Subsystem - Chroma 63800 Series Operation & Programming Manual

Programmable AC/DC Electronic Load 63800 Series Operation & Programming Manual
MEASure[:SCALar]:RLC:SET:LS?
FETCh[:SCALar]:RLC:SET:LS?
Description: Return the Ls measurement value of RLC CP mode
Query Syntax
Response Parameter
Example
MEASure[:SCALar]:RLC:SET:RL?
FETCh[:SCALar]:RLC:SET:RL?
Description: Return the R
Query Syntax
Response Parameter
Example
MEASure[:SCALar]:RLC:SET:RS?
FETCh[:SCALar]:RLC:SET:RS?
Description: Return the Rs measurement value of RLC CP mode
Query Syntax
Response Parameter
Example

8.6.3 LOAD Subsystem

LOAD
[:STATus]
[LOAD:]
ABA
MODE
SCIRcuit
PROTect
CLEar
LOAD[:STATus]
Description: The LOAD command makes the electronic load active/on or inactive/off.
Setting Syntax : LOAD[:STATus]?
Setting Parameter : 0 | OFF, 1 | ON
Query Syntax : LOAD[:STATus]?
Response Parameter: 0 | 1
Example : LOAD ON
[LOAD:]ABA
Description: ABA Mode setting. If the setting value is set to 'OFF', then the system will not
automatically adjust the bandwidth. If the setting value is set to 'ON' the system will
automatically adjust the bandwidth upon connecting the UUT to the AC Load. Before drawing
a current, the system will calculate the inductance of the UUT to adjust the bandwidth
accordingly before loading.
Setting Syntax : [LOAD:]ABA?
Setting Parameter : 0 | OFF, 1 | ON
8-12
: MEASure[:SCALar]:RLC:SET:LS?
FETCh[:SCALar]:RLC:SET:LS?
: <NR2>
: MEASure[:SCALar]:RLC:SET:LS?
measurement value of RLC CP mode
L
: MEASure[:SCALar]:RLC:SET:RL?
FETCh[:SCALar]:RLC:SET:RL?
: <NR2>
: MEASure[:SCALar]:RLC:SET:RL?
: MEASure[:SCALar]:RLC:SET:RS?
FETCh[:SCALar]:RLC:SET:RS?
: <NR2>
: MEASure[:SCALar]:RLC:SET:RS?
Set load ON / OFF
Set ABA mode
Set CC / CP / CV / CR mode
Set short ON / OFF
Queue protection status
Reset protection status