Before You Start - SEW-Eurodrive DFE32B PROFINET IO Manual

Installing the DFE32B option card in MOVIDRIVE® MDX61B
4.1.1

Before you start

Observe the following notes before installing or removing an option card:
•
•
•
•
•
•
Manual – DFE32B Fieldbus Interface PROFINET IO
Assembly and Installation Notes
Disconnect the inverter from the power. Switch off the DC 24 V and the line voltage.
Take appropriate measures (discharge strap, conductive shoes, etc.) to protect the
option card from electrostatic charge before touching it.
Before installing the option card, remove the keypad and the front cover (see
®
MOVIDRIVE MDX60B/61B operating instructions, section "Installation").
After having installed the option card, replace the keypad and the front cover (see
®
MOVIDRIVE MDX60B/61B operating instructions, section "Installation").
Keep the option card in its original packaging until immediately before you are ready
to install it.
Hold the option card by its edges only. Do not touch any of the components.
4
13