Relay Control; Induction Loop - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
3.2.20 Default functions + Optional functions enabled. RELAY CONTROL
This function will allow you to activate any relay from the list for 3 seconds.
This option displays a list with the relay identifi er and the relay name. The user can activate a
relay for 3 seconds by clicking on the corresponding row in the list. The list only shows the relays
confi gured under the
3.2.21 Default functions + Optional functions enabled. F1
Function only available on SMILE MONITORS.
The F1 function works as an output and sends a negative output.
If the F1 function is enabled, the terminal F1 / T and + is set to output and detects the F1 icon
on the monitor screen, displaying a confi rmation screen for a couple of seconds. To enable the
function, see the
Note:
- If it is not enabled, the terminal functions as an input to connect a pushbutton and doorbell functionality.
3.2.22 Default functions + Optional functions enabled. INDUCTION LOOP
Function available only on SMILE monitors with induction loop,
This function allows the induction loop to work with devices worn by people with hearing disabilities.
For the monitor loop to function (induction loop models), the Induction Loop icon must have been
pre-enabled by the installer. To enable the function, see the
On SMILE monitors, this screen is slightly different due to the functions available on this model
which are not present on the VIVO and VIVO+ models.
Note:
- For hearing aid with manual mode selection, the Digital Mode must be set.
Page 50

3.1.9.10 Relay control

3.1.9.4 Optional Functions
option.
option to see the operation.
3.1.9.4 Optional Functions option.