Function Description; Buttons; Icons - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor

Buttons

Function description

MENU button
When the touch screen is idle, pressing MENU will turn the screen on.
When the touch screen is on, pressing MENU will turn the screen to idle.
When the user is navigating a sub-menu, pressing MENU causes the monitor to return
to the main home screen.
Note:
- When the touch screen is idle, pressing this will also turn the screen on.
SOS
Panic button. See section:
Should there be a Property Management Unit (concierge), a panic call may be made
by pressing the SOS button for 3 seconds.
The panic call is a special call made to whichever PMU is confi gured to receive alarms
and is responsible for receiving these types of calls.
Notes (SMILE monitor):
- This button fl ashes in the following instances:
- In all other instances, it will remain switched off
Audio Activation and Hang-Up Button
When you receive a call (You have 30 seconds to answer before the device returns
to idle. During this time, the blue LED audio button will fl ash to let you know that the
call is waiting to be answered), press this button to talk to the visitor. The outdoor-
indoor audio channel is opened (the blue LED on the audio button lights up steadily
to indicate that you are in conversation with the outdoor panel and everything you say
will be heard on it), and the device is in hands-free mode.
Press to end the communication (the blue audio button LED will turn off again).
Communication will end automatically after 90 seconds, or whenever the button is
pressed.
Note:
- Audio pick-up and hang-up operations can also be performed from the monitor touch screen,
Door Opening Button
When you are in communication (video / audio & video) with the Outdoor Panel,
pushing this button will activate the door release.
Note:
- Door opening operations can also be performed from the monitor touch screen, see section:

Icons

Description
Do not disturb mode
This function deactivates the monitor's call sound.
Note:
- If you do not wish to hear the "beep" on receiving a message, this sound must be disabled.
Page 8
• When the monitor has no network connection (two fl ashes per second).
• When a panic call is activated and a PMU is set up to receive alarms (one fl ash every two
seconds).
see section: 5. CALLS.
5. CALLS.
See section: 3.1.1 Call Settings
5. CALLS (Panic calls - SOS Button).