Image Visualisation; Lift Control - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
3.2.12 Default functions + Optional functions enabled. PICTURE VIEW
This function allows you to view all captured images.
To see images that have been captured, press the images icon on the home screen.
The most recent image is displayed, along with the pre-defi ned description of the Terminal from
which the call was made, the date and the time. Scrolling from left to right will display the
most recent photos (sequentially).
If the image is pressed once, it will be displayed in full-screen mode. Clicking on the image again
will take the user back to the previous presentation.
To delete an image, select the desired image and press the delete button (recycle bin);
confi rmation will be required. The selected image (which will be displayed a little larger than the
rest) will be deleted.
IMAGE RESET. To erase all existing images, hold down the delete (recycle bin) button for
more than 1 second. Confi rmation will be required. These actions are not synchronised across
monitors in the same house.
3.2.13 Default functions + Optional functions enabled. LIFT CONTROL
When the lift control icon is pressed on the start menu, the lift is sent to the fl oor where the user
lives (for a predefi ned period of time). Up to 3 relays can be activated when this icon is pressed
(depending on the installation / confi guration determined by the installer, parameters defi ned
under the option

3.1.9.3 Lift control

settings). The relay must be in the same block as the monitor.
The monitor displays the action undertaken on the screen.
Page 43