Privacy Settings (User) - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
3 DESCRIPTION OF FUNCTIONS AVAILABLE ON MONITOR
You must fi rst set the monitor's language, date/time and address settings in order to confi gure / program
the remaining functions.
3.1 GENERAL SETTINGS
This function enables the confi guration of various monitor settings. When you press the General
Settings icon, you will be taken to a screen containing various icons that control these settings.
These settings can also be confi gured and personalised by the user.
Note:
- Access to the General Settings menu can be restricted by a PIN code if desired. Access is unrestricted
by default. See chapter
3.1.1 General Settings. RING SETTINGS
The ring settings function allows you to:
- Select a ringtone and volume for each type of call:
• Calls from outdoor panels.
• Calls from private panels (single line call panel).
• Call from the Property Management Unit Guard.
• Call from the Property Management Unit Administrator.
• Home to home calls (property to property).
• In-Home calls (monitors within the same property).
• Door Bell
• Timer (alarm). (See
- Select continuous ringtone:
• If this option is selected, the ringtone is played for 30 seconds.
• If this option is not selected, the ringtone is played only once.
- Select if you wish to hear a sound upon the arrival of:
• Received messages. New message alert.
• Opening of the door by a family member. Family access alert. Via the access control integrated
into the system, the door can be opened by means of an identifi er associated with a given user.
This option can be selected to make the monitor to emit a sound when the door is opened
(this sound is hard-wired).
• Silent panic alarm via secondary external SOS button. (See option:
(SOS button) / Silent Panic Alarm).

3.1.6 Privacy settings (User).

option3.2.16 Timer).
5. CALLS / Panic Call
Page 15