Installation; Control Buttons - Fermax SMILE Quick Start Manual

INSTALLATION

INSTALLATION OF AN OUTDOOR PANEL AND MONITOR
1
4
CONFIGURATION
SMILE MONITOR 3,5" / SMILE MONITOR 7"
The monitor supplied in the kit comes PRE-PROGRAMMED from the factory.
If the kit has 2 lines, both monitors, they are PRE-PROGRAMMED.

CONTROL BUTTONS

3,5"
a
b
2
VDS VIDEO KIT CITYLINE 1-2 L SMILE
2
Digital menu for internal parameter settings and confi guration.
7"
Press for 3 seconds to access the installer menu and ring tone menu.
Short press to display the Shortcut buttons.
In conversation or only video, press to open the door.
In standby, call to guard unit (if applicable).
Audio activation and hang-up (hands-free functions)
Wildcard button (default function/available on depending model):
Press for 1 second to perform auto-start.
With video, press and hold this button for 2 seconds to sequentially
select between the main camera and the secondary camera.
The SMILE monitor incorporates an OSD menu that is managed via the
monitor's navigation buttons
on the monitor to access the terminals'user and programming functions.
VDS
M
7"
O
1
N
I
3
T
O
R
by pressing the capacitive buttons
a
3
2
Cod. 970120 V01_18
b