Camera Activated; Call Property Management Unit (Pmu); Make Calls; A) Call/Connection Outdoor Panel - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
Information and icons that are displayed, depending upon the terminal from which the call was made:
OUTDOOR PANEL
PMU (Concierge)
Monitor
(same apartment)
Monitor
(another apartment)
Notes:
- Receiving calls with several monitors in the house. If there is more than one monitor in the house, all the
monitors will sound and display the conversation screen with the incoming call. When one of them responds,
the others will stop ringing and return to idle.
- Receiving calls with several monitors in the house and one being involved in a conversation. If a call is
received, the incoming call is announced on all available monitors (extensions), but only the monitor with the call
in progress (the one holding the conversation) is authorised to accept or reject it. If the second call is accepted,
the fi rst is terminated at both ends, and is connected to the second.

5.2 MAKE CALLS

The monitor can make calls to:
- Outdoor panels
• General Entrances
• Panels within its block
• Panels associated with the same home
- Concierges (Property Management Unit = PMU)
- Another monitor installed in the same dwelling.
- Another monitor on the same circuit.
Conversation screen.
When a call is received, the conversation screen will open automatically.
The information and icons appearing on the conversation screen may vary, depending on the terminal
from which the call was made and the function being applied.

a) Call/connection outdoor panel

See chapter

b) IP camera connection

See chapter

c) Call the Property Management Unit - PMU (concierge)

See chapter
Page 54
3.2.2 Camera Activates.
3.2.11 IP Cameras.

3.2.3 Call property management unit (PMU)