Mobility - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
If you click accept, an acceptance message is sent to the originating home and if the Contact List option
is opened, the destination tag will display the housing label (if available).
Note:
- If one of the contacts in the friends list is not reachable
(if, for example, their monitor has been disconnected)
the entry is still shown in the list, but in light grey and
italics to indicate that you cannot call them.
If Add to Friends List is selected in the Request, the
contact displays two arrows, meaning that the user
can receive calls from that contact or make calls to
that contact.
3.2.19 Default functions + Optional functions enabled. MOBILITY
This function allows you to link the monitor to multiple mobile devices.
When the mobility function is selected, the following screen will appear:
vivo
smile
Page 48
The contact list shows who you can call, and who
can call you:
(Arrow pointing to the right), appear in their list,
but they do not appear in yours so you can receive
calls from that contact.
(Arrow pointing to the left), appear in your list,
but you do not appear in theirs so you can receive
calls from that contact.
(Two arrows) indicate that the contact
belongs to both lists, so that the user can receive
calls from the contact or make calls to the contact.
If Add to Friends List is NOT selected in the
Friendship Request, the contact displays an arrow
pointing to the right or to the left, depending on the
monitor, and therefore the user can perform the
corresponding operation as explained above.