A) Standard Lynx Mode / C) Static Ip Mode - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor

a) Standard Lynx Mode / c) Static IP Mode

If the selected network mode is LYNX Mode or Static Mode, the monitor will check if the IP address
and the destination settings are available. Should any of these be unavailable, the monitor will
not change its settings. If the changes mean a change of IP, the web server will display the new
IP address.
Standard Lynx Mode
The monitor's factory default address is 10.0.0.1.
- Block: 2 digits (00..99) = block number.
- Flat: 2 digits (00..99).
- Unit number: 4 digits (0000..8191) = number of dwellings.
- Extension number: 1 digit (0..7) = number of monitors per dwelling.
Note: There must always be a monitor with the extension 0.
This information will generate the monitor's IP address automatically.
Note:
- It is vital that the default address not be used in real installations, as this could cause a confl ict of IP
addresses.
b) DHCP Mode
If DHCP mode is selected, the monitor will check if the destination confi guration of the dwelling is
available. If it is, the monitor will save the data and wait for a DHCP server. If there is no DHCP
server, the monitor will change its settings to the standard Lynx address.
Note:
- When changing network settings, the device will need to spend 1-2 minutes resetting some services. As
such, it is advisable to allow for this delay after any network confi guration change.
3.1.9.2 General Settings. Installer Settings DELETE ALL SETTINGS (Reset)
The Delete all settings function allows you to:
Delete user settings: Selecting this option deletes only user-related data, such as tone settings,
the friend request list, images, labels, etc.
Restore factory settings: Selecting this option resets the monitor to its factory settings. The
monitor's IP address is deleted and changed back to the factory address: 10.0.0.1.
Note:
- As the delete operation is irreversible, when you are on the delete confi rmation screen, a warning
message will appear alerting you about the reset and requesting renewed confi rmation prior to deletion.
This warning message appears regardless of the option selected.
Page 22