Installation - Monitor Measurements; Smile Monitor; Flush-Mount Installation; Surface-Mount Installation - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
6 INSTALLATION - MONITOR DIMENSIONS

6.1 SMILE MONITOR

FLUSH-MOUNT Installation

1

SURFACE-MOUNT Installation

1
Connect the cable to the RJ-45 connector. The cable should protrude by at least 10
centimetres, to facilitate the connection process. Male RJ45 connectors must be pre-
installed at both ends of the cable, with no protection on the connectors.
2
4
Connect the cable to the RJ-45 connector. The cable should protrude by at least 10
centimetres, to facilitate the connection process. Male RJ45 connectors must be pre-
installed at both ends of the cable, with no protection on the connectors.
2
3
Put the excess cable back into the hole in the wall.
5
3
Put the excess cable back into the hole in the wall.
4
Page 57