B) Technical Specifi Cations - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
b) Technical Specifi cations
- Operating temperature 5ºC to +40ºC / 41ºF to +104ºF.
- Relative humidity: 5-90%, without condensation.
Monitor Capacity and Parameters, (default values in brackets []):
- Maximum number of monitors per dwelling: 8.
- Maximum number of dwellings per block: 8,192.
- PIN codes:
• User. 1 code. [Not used] / [1234]. Used to access user settings or messages. This may be modifi ed.
• User alarm. 1 code. [0000]. Used to change the Alarm PIN. This may be modifi ed.
• Installer. 1 code. [4444]. Used to access installer confi guration parameters.
This may be modifi ed.
- Conversation channels: Maximum of 1 per apartment.
- Conversation time: 90 seconds.
- Call ring tones 22.
• 20 predefi ned ADPCM, .wav or .mp3 melodies.
• 2 may be downloaded by users from the SD card or web server (.wav or .mp3).
- Call ring tone maximum time: 30 seconds.
- Image memory: 128 (QVGA 640x480 resolution ).
- Text messages: 128. 128 character length.
- Audio Notes: Maximum recording time 300 seconds.
- IP address: automatically calculated based on the apartment block number and extension.
Labels
- Tenant name: 16 characters
- Monitor label: 16 characters
- Maximum times:
• Switch-on: 30 seconds. The system will boot up to full functionality within 60 seconds.
• Video connection after call reception: 2 seconds.
• Video connection after auto switch-on: 2 seconds.
• Audio and video delay (from panel to monitor): 0.2 seconds.
• Audio / video desynchronisation: 0.05 seconds.
• Relay activation delay 0.5 seconds.
Page 62