Contact List - Friendship Request - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
3.2.18 Default functions + Optional functions enabled. CONTACT LIST - FRIENDSHIP
REQUEST
A list of all available monitors will be displayed on the Contact List screen. When the user selects
contact
the desired monitor, the call is sent automatically.
list
The monitor can manage two groups of contacts:
Allow all incoming calls
Only allow calls from friends Calls can be restricted to Friendship Requests via the Contact
List.
friend
See chapter
request
The monitor allows calls between different homes, however to preserve privacy, you can generate
a list of friendship requests, to accept calls only from a list of friends.
Note:
- This function is synchronised across all monitors belonging to the same unit.
Friend request
When a user wants to call another home on the same circuit, a Friendship Request must fi rst be sent by
clicking the icon. A window for fi lling out this request is displayed automatically.
If you enter the house number (Block-no. Monitor), for example: 000004, upon pressing "Ready" the name
of the tenant will be fi lled in automatically.
Page 46
3.1.7 Home-to-home call settings.
Notes:
- Should a call come through during the cleaning period,
the monitor will unlock itself automatically.
- Use only a soft, lint-free cloth for cleaning. Abrasive
cloths, towels, paper towels and similar products may
cause damage to the monitor screen. Avoid getting
any liquid and moisture in the openings. Do not use
aerosols, solvents or abrasives. Do not spray cleaning
agents on directly.