Home-To-Home Call Settings; Push To Talk" Audio Mode - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
3.1.7 General Settings. HOME-TO-HOME CALL SETTINGS
The home-to-home settings function opens a screen that allows you to fi ll in the monitor labels:
Tenant name: Identifi es the house (i.e., the García family, name Marta Jover ...).
Note:
- All monitors belonging to the same property must have the same Name, Block and Unit.
Monitor tag: Describes its location (i.e. dining room, kitchen, living room...). Each monitor has
a different label. Since up to 8 monitors can be installed per property, the extension numbers
areas are as follows: 0...7.
This screen also displays the options to:
- Allow all incoming calls
- Only allow calls from friends See chapter:
For more general information on this option, see
calls
Calls can be made from one monitor to another. There are 2 types of calls:
- Internal: when you make a call from your monitor to any other monitor in the same property.
- External: when you make a call between properties, i.e. to any monitor on the same circuit.
3.1.8 General Settings. "Push to Talk" AUDIO MODE
The "Push to Talk" audio mode lets you enable or disable this audio mode. This audio mode
works by pressing the corresponding button to speak, and releasing it to listen. See chapter:
enabled
CALLS.
disabled
Page 20
3.2.18 Contact list - Friendship request.
chapters3.2.9 Internal calls and 3.2.10 External
5.