A) - B) Test Camera; C) Delete Camera/S - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor

a) - b) Test camera

In both the edit and add screen,there is a camera icon with a question mark that can be used to
check that the data you have entered will let you connect correctly to the camera.
Note:
- In case of any error, a warning message will appear on the screen. The test call cannot exceed 30 seconds.

c) Delete camera/s

You may select one or more cameras for deletion, you will be asked for confi rmation before
deleting the selected cameras. If you wish to delete all the cameras, press and hold the recycle
bin button until you are asked for confi rmation and if you say yes, all the cameras in the list will
be deleted.
Notes:
- There is no established IP camera limit, although a performance test has been carried out with 200 IP
cameras.
- Duplicate cameras, i.e. those with a duplicate RTSP, are not permitted.
- The established resolution is 640 by 480, although it is compatible with higher resolutions up to 1280
by 720 or 1280 by 960.
- Monitors within the same house do NOT synchronise their cameras, each monitor keeps its own IP
cameras.
Page 31