Audio Notes - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
Sabotage detection system (tamper alarm)
The Vivo monitor has a tamper detection connector. If someone tries to disconnect it, the monitor
will generate an alarm sound and send an alarm report to the Property Alarm Management Unit.
Any sabotage action should be detected and communicated to the Property Alarm Management
Unit (Concierge). The integrity of the connection between the Sensor Module and the monitor,
and between the monitor and the Property Alarm Management Unit, must be guaranteed.
The integrity of the monitor is guaranteed by the tamper detection.
Communication between the monitor and the Sensor Module is checked periodically. The monitor
continuously checks the status of the Sensor Module and in the event of failure, the monitor will
inform the Property Management Unit of a tamper alarm.
Communication between the Property Management Unit and the monitor is monitored periodically,
on the system monitors where the alarm is enabled. If communication should fail, an alarm
message will be displayed in the Property Management Unit.
Note:
-The Smile monitor does not have a tamper detection connector.
3.2.6 Default functions + Optional functions enabled. HOME AUTOMATION
When the automation icon is selected, the web browser that the installer previously pre-confi gured
following the previously explained steps is opened. See chapter
If this function has not been programmed, a message will appear warning that the installer should
be contacted.
3.2.7 Default functions + Optional functions enabled. AUDIO NOTES
The audio notes feature allows the option to leave audio messages for other people living in
the same house. Audio notes are audio messages that can be recorded on the monitor for later
playback.
When there are new audio notes to be heard, the user is informed in three different ways:
1. The audio notes icon indicates that there are no audio notes recorded on the monitor, without
displaying any numbers.
2. The audio notes icon changes to show that audio notes have been recorded on the monitor,
a blue circle showing the number of notes recorded appears, and the message LED lights up.
3. Once the user has entered the Audio Note screen by pressing the audio notes icon, the blue
circle will turn white, this time showing the number of unread messages.
SOS
Page 38
Notes:
- If the user has listened to all the audio notes, the blue / white circle will disappear and
the Audio Note icon will return to its original appearance.
- The message LED will go out when the audio notes screen is accessed. The LED
will go out when you exit the screen, even if the new messages have not been read.
3.1.9.6 Home Automation settings