Mobility Settings; Relay Control - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
a
e
e) Save confi guration. Saves the current settings to the SD card.
f) Save images. Transfer images stored on the SD card.
g) Install third-party applications (apps). Integration of third-party solutions with the Lynx system
It is possible to integrate third-party solutions into the Lynx system. This will allow a systems integrator
to adapt an existing app, or develop a new app for the monitor. The main objective is the ability to add
solutions for the home such as: automation, CCTV, alarms, etc.
f) Exporting the IP camera confi gurations.
Notes:
- If a blank SD card is inserted, the monitor will format it and create the folders that it will use.
- When writing from or to the SD card, the system will search all fi les in the appropriate folder.
- To install an application, drag and drop from SD Card to installed. The system will ask you for confi rmation.
- To delete an application, drag and drop from Installed to the recycle bin icon, or select the application and press
the recycle bin icon. The system will ask you for confi rmation.
- The SD card menu is not available on the SMILE monitor because it has no SD slot.
3.1.9.9 General Settings. Installer Settings MOBILITY SETTINGS
This function allows you to confi gure the Lynx router settings.
A screen appears that allows the monitor to identify the Lynx router currently associated with the
vivo
installation. If no IP address has been determined, this must be done manually and confi rmed.
smile
3.1.9.10 General Settings. Installer Settings RELAY CONTROL
This function allows you to confi gure the external relays located in the Lynx system from the
monitor. These external relays are the MASTER IP relay modules Ref.1615 / SECONDARY
Ref.1616 and can be connected at any point on the Lynx network.
A list of fi ve relays and six fi elds is displayed on the relay settings screen.
Checkbox: This fi eld is used to activate or deactivate each relay.
ID: Relay identifi er - this cannot be changed.
Name: The name of the relay, which the user can adjust as preferred. By default, it is blank and
the maximum name length is 16 characters. Should the user enter more than 16 characters, the
extra characters will be ignored.
Page 28
c
b d
g
f
h
SD options:
a) Firmware updates. From the SD card.
b) Loading confi gurations. Select a confi guration
fi le from the SD card and load it into the monitor.
c) Loading ringtones. Loading of ring tones from
the SD card to the monitor. The ringtones loaded will
be available to the user, each under the appropriate
fi le name.
d) Loading the IP camera confi gurations.