LYNX Monitor
7 CONNECTORS - TECHNICAL SPECIFICATIONS
7.1 SMILE MONITOR.
a) Connectors
Connections:
RJ-45 10/100 Base -T Ethernet, powered by mains socket RJ-45.
+, - : 12 Vdc power supply, (if PoE switch is not used).
P/A: Using this terminal, you can choose between 2 different, mutually exclusive operations: connection
of an external panic button or the option to connect a call extension or a light / doorbell activator.
• P/A, -: To connect a secondary external SOS panic button (dry contact).
See:
5. CALLS / Panic Call (SOS button) / Pressing an external SOS secondary button.
or
• P/A, -: To connect an Electric Call Extension (ref. 2040) or a Light/Buzzer Activator (ref. 2438), (which
would be activated by the call).
T/F1: Using this terminal, you can choose between 2 different, mutually exclusive operations: connecting
a pushbutton for the doorbell or an F1 function that sends a negative output.
• T/F1, -: To connect a button for the doorbell.
Note:
- When the doorbell is pressed, the melody selected for this call will be played. The monitor screen will not
activate. If the doorbell is pressed during the conversation, the melody is not heard, but a message is
displayed on the screen.
or
• T/F1, +: The F1 function works as an output and sends a negative output. For this to work in this way,
the F1 icon must have been pre-enabled by the installer. See:
D1, D2: RS-485 serial port to communicate with other future systems.
3.2.21 F1.
Page 59