B) Edit Camera; A) Add Camera - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
3.1.9.12 General Settings. Installer Settings IP CAMERA SETTINGS
This function allows you to confi gure an IP camera. IP cameras must be manually added to the
monitor.
In the settings screen you can add cameras, test the camera you want to add, edit those cameras
that have already been added and delete one or more cameras.
add
edit
delete

a) Add camera

A screen appears that will let you add a new camera. The following fi elds must be taken into
account:
Name: This fi eld is required to identify the camera.
RTSP: This will be the address to which we are connecting, it is supplied by the IP camera
provider, or can be obtained via the ONVIF Device Manager programme; this fi eld is mandatory.
USER and PASSWORD: For cameras that require a username and password for connection -
these fi elds are optional.
WIDTH and HEIGHT: These are the camera resolution parameters; these parameters are
mandatory and no more than 4 digits may be inserted.

b) Edit camera

A screen appears that allows you to edit existing cameras. This screen retrieves the data
corresponding to the camera that you have selected, allowing you to edit the fi eld that you want;
these fi elds will also have the same restrictions specifi ed in the previous section.
Page 30