Installer Privacy Settings; A) User Pin; Sd Card Menu - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor
3.1.9.7 General Settings. Installer Settings INSTALLER PRIVACY SETTINGS
The privacy settings function allows you to change the codes that are by default programmed
into the monitor:
a) User PIN (default is: 1234)
b) User Alarm PIN (default is: 0000)
c) User PIN (default is: 4444)

a) User PIN

To change the user PIN. The default user
PIN is: 1234.
Page 26
Parameters of Automation Settings
- Name. Application name.
- Server. Server IP address.
- Door. Optional (if needed). Door number.
- URL. Web server address
For example: http://www.fermax.com
- Unit Router. Select this option if the automation
server is located on another LAN. The household
requires a ROUTER confi gured to its respective
address. An IP address will automatically be
generated, depending on the unit you are working
on.
When the automation icon is selected, the web
browser previously pre-confi gured by the installer,
through following the aforementioned steps, is
opened. If this function has not been programmed,
a warning message will appear advising that the
installer be contacted.
Note:
- Other automation functions can be performed via the use
of third-party applications (apps). See chapter:

SD card menu.

3.1.9.8