Configuring The Monitor From The Web Server - Fermax LYNX VIVO User& Installer's Manual

LYNX Monitor

4 CONFIGURING THE MONITOR FROM THE WEB SERVER

The monitor has an integrated web server, allowing for confi guration changes. This web server is accessed
via the monitor's IP address. The monitor's IP address should by factory default be 10.0.0.1 (Block # 0,
Unit # 1), but the monitor will surely already have a corresponding installation IP address, which will have
been assigned under the 3.1.9.1 Monitor settings option.
For more details of the various settings, see chapter 3.1 General Settings.
The browser opens with the confi gured IP address of the monitor. A screen opens requesting a username
and password:
- User by default: admin
- Password by default: admin
Page 51