Communication; System Integration; System Configuration - Siemens SITRANS F Coriolis FCT030 Function Manual

Communication

2.1

System integration

This chapter provides information on how to integrate the device in a point-to-point or multidrop
Modbus RTU network in non-hazardous or hazardous areas. Many details of network design
are beyond the scope of these operating instructions. The points below provide an overview
of the major design criteria. For further details contact Siemens.
2.2

System configuration

Non-hazardous areas
The following figures show examples of installations in point-to-point and multidrop
configurations in non-hazardous areas.
Figure 2-1
FCT030 Modbus (From firmware 4.0)
Function Manual, 06/2018, A5E39931813-AB
Point to point configuration in non-hazardous locations
2
9