Siemens SITRANS F Coriolis FCT030 Function Manual page 118

MODBUS commands
4.10 Modbus holding registers tables
Modbus Data type /
register Size in bytes
9350 Unsigned / 4
9356 Unsigned / 4
10256 Unsigned / 4
9354 Unsigned / 4
9352 Unsigned / 4
9359 Unsigned / 2
9360 Float / 4
9362 Float / 4
7162 Unsigned / 2
118
Parameter Description
Alarm items 5 Bit encoded selection
of alarm items that im‐
pact the output. See
Alarm items
(Page 145). Applicable
if Status mode = 1.
Alarm items 8 Bit encoded selection
of alarm items that im‐
pact the output. See
Alarm items
(Page 145). Applicable
if Status mode = 1.
Alarm items 9 Bit encoded selection
of alarm items that im‐
pact the output. See
Alarm items
(Page 145). Applicable
if Status mode = 1.
Alarm items 7 Bit encoded selection
of alarm items that im‐
pact the output. See
Alarm items
(Page 145). Applicable
if Status mode = 1.
Alarm items 6 Bit encoded selection
of alarm items that im‐
pact the output. Mainly
simulation alarms. See
Alarm items
(Page 145). Applicable
if Status mode = 1.
Polarity Logical polarity of sta‐
tus output.
On delay Time to delay the lead‐
ing edge of the output.
Off delay Time to delay the trail‐
ing edge of the output.
Forced value Forced value when
forcing is active.
Default value Value range /
[units] Setting options
(units register)
0
0
0
0
0
0
● 0: Active high level
● 1: Active low level
0.0 0.0 - 100.0
[s]
0.0 0.0 - 100.0
[s]
0
● 0
● 1
FCT030 Modbus (From firmware 4.0)
Function Manual, 06/2018, A5E39931813-AB
Access
level
Read /
write
Read /
write
Read /
write
Read /
write
Read /
write
Read /
write
Read /
write
Read /
write
Read /
write