Siemens SITRANS F Coriolis FCT030 Function Manual page 178

MODBUS commands
4.10 Modbus holding registers tables
Channel 2 output status
Table 4-95 Channel 2 output status
Modbus Data type /
register Size in bytes
8864 Unsigned / 2
8865 Unsigned / 2
Channel 2 output frequency
Table 4-96 Channel 2 output frequency
Modbus Data type /
register Size in bytes
8905 Unsigned / 2
8906 Float / 4
Channel 2 output pulse
Table 4-97 Channel 2 output pulse
Modbus Data type /
register Size in bytes
8973 Unsigned / 2
8978 Float / 4
178
Parameter Description
Simulation Enables or disables
simulation of channel 2
output status.
Simulated value Signal level that is out‐
put on the channel
when simulation is ena‐
bled.
Parameter Description
Simulation Enables or disables
simulation of channel 2
output frequency.
Simulated value Frequency value that is
output on the channel
when simulation is ena‐
bled.
Parameter Description
Simulation Enables or disables
simulation of channel 2
output pulses.
Simulated value Pulse frequency value
that is output on the
channel when simula‐
tion is enabled.
Default value Value range /
[unit] Setting options
(unit register)
0
● 0: Disabled
● 1: Enabled
0 0, 1
Default value Value range /
[unit] Setting options
(unit register)
0
● 0: Disabled
● 1: Enabled
1.0 0.0 - 12500.0
[Hz]
Default value Value range /
[unit] Setting options
(unit register)
0
● 0: Disabled
● 1: Enabled
0.0 0.0 - 12500.0
[pulses/s]
FCT030 Modbus (From firmware 4.0)
Function Manual, 06/2018, A5E39931813-AB
Access
level
Read /
write
Read /
write
Access
level
Read /
write
Read /
write
Access
level
Read /
write
Read /
write