Siemens SITRANS F Coriolis FCT030 Function Manual page 92

MODBUS commands
4.10 Modbus holding registers tables
Modbus Data type /
register Size in bytes
8862 Float / 4
7148 Unsigned / 2
General channel 3 settings
Table 4-35 General channel 3 settings
Modbus Data type /
register Size in bytes
9101 Unsigned / 2
7430 Unsigned / 2
92
Parameter Description
Off delay Time to delay the trail‐
ing edge of the output.
Forced value Forced value when
forcing is active.
Parameter Description
Operation mode Operation mode.
Active/passive Shows application pos‐
operation sibilities.
Default value Value range /
[units] Setting options
(units register)
0.0 0.0 - 100.0
[s]
0
● 0
● 1
Default value Value range /
[units] Setting options
(units register)
0
● 0: Off
● 1: Current output
● 2: Frequency output
● 3: Pulse output
● 4: Signal output
● 5: Discrete input
● 6: Analog input
-
● 0: Active operation
not possible, use
passive wiring!
● 1: Active operation
possible, hardware is
able to drive the
current loop.
FCT030 Modbus (From firmware 4.0)
Function Manual, 06/2018, A5E39931813-AB
Access
level
Read /
write
Read /
write
Access
level
Read /
write
Read
only