Table of Contents
Advertisement
Parameterizing
7.1 Parameterizing via the operator interface
Selection
TIME ZONE
DAYLIGHTSAVING
7.1.5
Communication
You configure the communication interface in this menu.
If you exit the "COMMUNICATION" device setting with the F1 key, the device asks if you want
to restart.
Selection
MAC
IP address
Subnet
Gateway
DHCP
84
Range
Time zone, refers to coordinated universal time (UTC).
−12:00 ... +14:00, in 30-minute intervals
Automatic time change
Range
MAC address. Read only.
Manual setting of the IP address is only possible when DHCP is
deactivated.
Format: 000.000.000.000
Manual setting of the subnet is only possible when DHCP is
deactivated.
Format: 000.000.000.000
Manual setting of the gateway is only possible when DHCP is
deactivated. In the case of data exchange with an IP address
which is not in the home subnet, the data can be transmitted
via a gateway. The gateway interconnects different networks.
Format: 000.000.000.000
(Dynamic Host Configuration Protocol)
If DHCP is activated, network configurations are automatically
assigned. This enables automatic integration of devices in an
existing network.
If DHCP is activated, network configurations cannot be adjus‐
ted manually.
Factory setting
00:00
AUTO EU
Factory setting
-
-
-
-
ON
Equipment Manual, L1V30827278B-01
PAC4220
Advertisement
Table of Contents
