Introduction; Purpose Of This Documentation; Document History - Siemens SITRANS F Coriolis FCT030 Function Manual

Introduction

1.1

Purpose of this documentation

This manual contains all information needed to integrate the process instruments into a
communications network. The manual is aimed at control system designers, system
integrators, instrument engineers.
In order to operate safety and for more detailed information you need the product specific
manual. Available for download from Flow documentation
flowdocumentation).
This manual applies to the SITRANS FCT030 transmitter Modbus version only. The FCT030
transmitter can be used in combination with the following sensors:
Mass 2100
FC300
FCS400 and FSC300
In order to operate a Coriolis flow meter, you also need Operating Instructions. See Flow
documentation (http://www.siemens.com/flowdocumentation)
1.2

Document history

The following table shows major changes in the documentation compared to the previous
edition.
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
06/2018
06/2017
Use the device to measure process medium in accordance with the information in the
Operating Instructions.
Note
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.
FCT030 Modbus (From firmware 4.0)
Function Manual, 06/2018, A5E39931813-AB
Note
Second edition
First edition
(http://www.siemens.com/
1
7