Outline; Features - Ikegami HLM-3250W Operation Manual

H H LM-3250W FULL HD Multi-Format LCD Color Monitor HLM-3250W FULL HD Multi-Format LCD Color Monitor

1. Outline

1-1. Outline
This 32-inch type HDTV/SDTV multi-format color
monitor employs a full high-definition liquid crystal
panel for reduction in thickness, weight and power
consumption, and is designed for use in various spaces
such as sub-control rooms, editing rooms, monitor wall,
transmission control desks, and outside broadcast vans.
This monitor is compatible with the functions and
operation of the HTM/TM series CRT monitors, so that
it can realize the functions necessary for a broadcasting
service monitor with conventional operation.

1-2. Features

(1) High performance liquid crystal panel
The Full-HD (1920 x 1080 dots) 10-bit liquid crystal
panel features high brightness, high contrast, wide
viewing angle, quick response and good color
reproducibility. Accordingly, realistic images can be
displayed with higher-fidelity gradation but without
having to resize the input pixels. This unit is best suited
for shelf-mounted monitoring applications.
(2) Multi-format
The monitor supports various broadcasting formats.
The monitor automatically identifies various types
of input signal formats. (optional component input: set
on MENU)
•480i/59.94 (NTSC) •1035i/60, 59.94
•575i/50 (PAL-B) •1080i/60, 59.94
•480p/59.94 (*1) •1080i/50
•1080psF/30 •720p/60, 59.94
•1080psF/25 •720p/50
•1080psF/24, 23.98 •720p/30, 29.97
•1080p/60, 59.94 •720p/24, 23.98 (*2)
•1080p/50 •720p/25
•1080p/30, 29.97
•1080p/25
•1080p/24, 23.98
(*1) RGB/YPbPr input only
(*2) SDI input only
(3) Diverse input sources
The monitor is standard equipped with two SDI
signal (compatible with both HD/SD 4:2:2) inputs and
two analog composite signal inputs. It also comes
standard with one DVI-D signal input (VGA/SVGA/
XGA/WXGA/SXGA/UXGA/WUXGA).
The multi-SDI input (*) compatible with 3G-SDI
(single), analog PC input and RGB/YPbPr inputs are
optionally available.
* Under development (scheduled to be released in
spring 2009, version upgrade of the monitor itself
needed)
(4) Compatibility with embedded audio
Standard equipped with an embedded audio feature,
the embedded audio signals multiplexed with HD-SDI
signal or SD-SDI (4:2:2) signal can be automatically
recognized and the audio output can be heard through
the built-in stereo speakers or stereo headphones. The
monitor also has a standard embedded audio level
meter display on the screen.
Using an optional device, the embedded audio signal
may be handled as an analog output (when the EA-
240A is mounted) or as an AES/EBU output (when the
EA-240D is mounted).
Besides, the optional 3G-SDI (single) multi-SDI
module comes in two types: Embedded analog audio
output type (D3G-240A*) and AES/EBU output type
(D3G-240D*).
* Under development (scheduled to be released in
spring 2009)
(5) Remote control functions
The monitor can be remote-controlled with the use
of four remote control functions. Depending on the place
of installation and type of operation, the parallel, serial
or wireless mode can be used.
In addition to the conventional parallel remote
control (pin assignment by user is possible), the monitor
also comes standard with a serial remote input
interface that enables remote control with just one BNC
coaxial cable.
Up to 99 monitors can be remote-controlled
individually or concurrently using an optional serial
remote controller SRC-301A/Z simply with Ikagami's
various monitors being loop-through connected.
An infrared wireless remote controller RCT-30A is
also optionally available.
The RS-485 input/output terminals are also standard
designed for control of up to 32 units.
- 1 -